Single Hung Tilt Window

 


Details


Single Hung Tilt windows consist of one operating lower sash and a fixed upper sash. The lower sash slides up and down to ventilate and tilts inward from the top for easy cleaning. In 2013, the Wardco single hung was tested to the highest possible rating for air and water infiltration – A3 and B7. With ratings this high, we can honestly say that there is no better single hung window on the market! We achieve these results by using a thicker vinyl extrusion, a newly designed sill pocket and both internal and external reversible weep covers that let water out without letting air in.

Window Features

  • Multi-chamber frame provides strength and added energy efficiency
  • Double wall pull rail for structural integrity
  • Internal glazing stops for added security
  • Enhanced pocket cover with bulb seal to reduce air infiltration
  • Internal reverse weep covers to allow excess water drainage while preventing air infiltration
  • Lower sash tilts inward for easy cleaning from inside


Standard Sizes

  • Width – minimum 16”, maximum 48”, available in 1/8” increments
  • Height – minimum 32”, maximum 78”, available in 1/8” increments
  • (sizes below or above min/max may be available – contact dealer for details)


Interior Options

  • Accessory Groove Cover
  • 3/4” Drywall or Jamb Extension Adapter
  • Celuka (solid composite vinyl) Jamb Extension – up to 7-1/8”
  • Solid Pine or Oak Jamb Extension – up to 4-5/8”


Exterior Options

  • Accessory Groove Cover
  • 3/4” Sloped Sill
  • 1/8” Brickmould – referred to as “0” brickmould or exterior frame extension
  • 1”, 1-1/4”, 2” Brickmould – with/without nail fin, with/without siding j-channel
  • Nail Fin only


Grille Options

  • 5/8” Flat – white, black, brass, pewter
  • 5/8” Flat – two-tone (white in, standard colour out)
  • 3/4” Georgian – white
  • 1/4”x5/16” Square – white, brass, pewter
  • Pencil – white, brass, pewter
  • 7/8”, 1-1/4”, 2” SDL – white (paintable to match exterior window colour)


Hardware Options

  • Self-locking window latch


Screen Options

  • Half screen

Energy Efficiency

GlazingEnergy RatingU-FactorVisible TransmittanceSolar Heat Gain Coefficient
3mm PPG Clear / SG400301.790.610.53
3mm PPG SG400 / Clear281.790.610.50
3mm PPG SB60 / SG400211.640.550.32
3mm PPG Clear / SB70XL201.630.500.30
3mm PPG SB70XL / Clear151.630.500.22


Lifetime Warranty Policy

Wardco Window & Door Manufacturing stands behind what we sell, the purchase of your new windows is just the beginning.

We are proud to offer you our industry leading Lifetime Non-Prorated Transferable Warranty. Subject to the conditions, exclusions, and limitations listed below, Wardco warrants that our products will be free from defects in material and workmanship from the initial state of purchase (provided the product has been used under normal conditions and residential use).

Warranty Policy




Ask a Question?   Find a Dealer →